HRANITHERM 603.01 White - EVA Hot Melt Cartridge

White unfilled hot melt adhesive in cartridges based on EVA is intended for gluing furniture edges using Holz-Her edge-banding machines.

Examples of use:

• gluing ABS edges,
• gluing PVC edges,
• gluing laminate edges.

Characteristics:

White unfilled hot melt adhesive Hranitherm 603.01 is characterised by perfect versatility based on its excellent properties, such as melting rate, higher thermal resistance and viscosity. Available also in transparent version (Hranitherm 603.00).

Brookfield viscosity at 200°C	60,000-85,000	mPas
Softening point (ring and ball method)	105–115	°C
Density	1.0	g/cm3
Suitable working conditions: Processing temperature Material moisture content Pressure on snub rollers	190–210 8–10 3–5	°C % kg/cm2

Application:

When using the hot melt adhesive, observe the application temperature and check it on a regular basis by measuring on the roller or nozzle. The temperature shown on the edge-banding machine control panel may differ from the actual temperature. Lower temperature of the adhesive may affect its open time and consequently impair the bonded joint quality. At a higher temperature, the adhesive may degrade, which affects its colour, viscosity and adhesion. When banding edges from various materials, regular testing of banding strength and quality is advisable. Recommended temperature of the environment and materials is
15–25°C.

Clean any residual adhesive on furniture elements using Hraniclean 01 (08). In glue pots use Jowat 236.50.

For additional information please refer to the material technical and safety data sheets.

Packaging and storage:

Keep in original container. If stored in closed containers in a cold and dry place at temperatures not exceeding 20°C, the shelf life is 24 months.